# Fishing3D

> 3D-printable fishing gear as digital print files: a crankbait configurator
> (six parameters, live 3D preview), 24 named lure models (RIPPLE, TREMOR,
> UNDERTOW, BRUISER, ... plus a topwater line: poppers and pencils),
> soft-bait molds, bankstick rod holders with a printed 3/8" BSF thread,
> kayak rod tube mounts, workshop tools and wall-mounted rod racks.
> Crankbaits: length (5/7/9/11 cm), body shape (minnow/crank), dive class
> (shallow <1 m / medium 1–2 m / deep 2–4 m), behavior (floating/sinking),
> treble hook size (#6/#4/#2), finish suggestion. Priced $4–15 per design.
> Digital files only, instant delivery by email. No account needed.

Operated by Deimann Com GmbH, Hamburg, Germany.

## What buyers receive

- STL: two-part body with through-wire routing (print flat, no supports)
- 3MF with print profile (Bambu A1/P1S/X1C, Prusa MK4, Ender 3)
- Parts list (treble hooks, split rings, stainless wire 0.8–1.0 mm,
  ballast: tungsten/steel/brass — never lead, 2-part epoxy)
- Assembly & sealing guide, tuning guide

## Printer compatibility

Files are vendor-neutral (STL + generic pre-oriented 3MF, no supports needed)
and open in any slicer (Bambu Studio, PrusaSlicer, Cura, OrcaSlicer). Every
part fits a 220 x 220 mm bed — the Creality Ender 3 is the deliberate size
limit. Print guides include dialed-in sections for Bambu Lab A1/P1S/X1C,
Prusa MK4 and Creality Ender 3. Material: PETG recommended (required for
molds); lures also print in PLA. Trademarks belong to their owners; named
for compatibility only.

## Honest claims policy

Dive depth is stated as a class with a range, never as an exact number —
line, retrieve speed and tuning shift it. Designs are built on proven base
geometries. Stainless through-wire and epoxy sealing are required steps.
This is a DIY product: buyers print, assemble and seal it themselves.

## Product categories

- Crankbaits (lures): 20 curated models + full configurator; $5–12
- Topwater lures: poppers (7/9 cm, cupped face) and pencils (10/12 cm,
  tail-weighted walk-the-dog), surface only — no dive class; same required
  steps as all lures (through-wire, epoxy sealing); $8–11
- Soft-bait molds: two-part molds, print the plate twice; PETG required;
  good for dozens of pours, not industrial tooling; pour guide with
  required safety steps (plastisol ~170 °C); $7–15
- Rod holders: bankstick rest heads (V / U / butt grip), printed 3/8" BSF
  female thread in the file; no load ratings; $4–7
- Bankstick adapters: camera adapter (3/8" BSF to a stainless 1/4"-20 bolt),
  100/150 mm extensions, twin head; no load ratings; $5–7
- Kayak mounts: rod tube on 1" gear-track plate or round-rail clamp;
  stainless hardware not included; no load ratings, use a rod leash; $7–9
- Workshop tools: wire bending jig (through-wire eyes), drying rack and
  drying wheels (6/12 lures) for epoxy curing — the tools for the two steps
  our lure files declare required; motor and steel pins not included; $5–10
- Rod racks: wall-mounted rod storage (horizontal 6/9 rods, vertical 6);
  screws and anchors not included; no load ratings; $7–9

## Guides (honest how-to content)

https://fishing3d.com/guides/ — full-HTML articles, no JS needed:
- /guides/3d-printed-fishing-lures — what a printable lure needs (pillar)
- /guides/sealing-3d-printed-lures — epoxy sealing, why it is required
- /guides/through-wire-construction — why through-wire is non-negotiable
- /guides/petg-vs-pla-fishing-lures — material choice by use case
- /guides/3d-printed-soft-bait-molds — pouring plastisol, required safety
- /guides/best-3d-printer-for-fishing-gear — a 220 x 220 mm bed is enough
- /guides/3d-printed-rod-holders — bank heads, adapters, printed 3/8 BSF thread
- /guides/3d-printed-kayak-mounts — gear-track and rail rod tubes for kayaks
- /guides/lure-drying-wheel — why lures rotate while epoxy cures

## Grounding page for agents

https://fishing3d.com/for-ai.html — full catalog as table + embedded JSON
(names, slugs, design codes, categories, specs, USD prices), status, policies.

## Pages

- https://fishing3d.com/ — shop, configurator, how it works
- https://fishing3d.com/p/<slug> — one page per product (e.g. /p/ripple,
  /p/shad-mold-10, /p/bank-v-rest, /p/track-rod-tube); full list in sitemap.xml
- https://fishing3d.com/legal.html — Impressum, Datenschutz, AGB, Widerruf (German)